Commands Listed in Alphabetical Order
Examples
RF:PROBE:GAIN
?
might return RF:PROBE:GAIN 0.1000E+00 indicating that
the attached 10x probe delivers 1 V to the RF input for every 10 V applied to the
probe input.
RF:PRObe:ID
:SERnumber? (Query Only)
This query returns the serial number of the probe attached to the RF input.
NOTE. For Level 0 and 1 probes, the serial number will be "".
Condition
s
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
RF:PRObe:ID:SERnumber?
Related Commands
RF:PRObe:ID:TYPe?
Examples
RF:PROBE:ID:SERNUMBER? might return :RF:PROBE:ID:SERNU MBER
"B010289"
indicating
that the serial number of the probe attached to the RF
input is B010289.
RF:PRObe:ID:TYPe? (Query Only)
This query returns the type of probe attached to the RF input. Level 2 (or higher)
probes supply their exact product nomenclature; for Level 0 or 1 probes, a generic
*“No Probe Detected” message is returned.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
RF:PRObe:ID:TYPe?
Related Commands
RF:PRObe:ID:SERnumber?
2-568 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
