Commands Listed in Alphabetical Order
LIN specifies th
eLINbus.
FLEXRay specifies the FlexRay bus.
AUDio specifies the audio bus.
ETHERnet specifies the Ethernet bus.
MIL1553B specifies the MIL-STD-1553 bus.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS? might return
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:SPI:CO NDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B2:SP I:CONDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B3:SP I:CONDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B4:SP I:CONDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:SP I:DATA:MOSI:VALUE "XX"
.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:CONDition
This command sets the condition (word start, label, matching data, word end, or
error) to be used to search on ARINC429 bus data. SEARCH<x> is the search
number, which is always 1. B<x> is the bus number.
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:AR INC429A:CONDition
{STARt|END|LABel|DATA|LABELANDDATA|ERR or}
SEARCH:SEARCH<x>:TRIGger:A:B
US:B<x>:ARINC429A:CONDition?
Related Commands
Most of the other SEARCH:SEARCH<x>:TRIGger:A:B US:B<x>:ARINC429A
commands are impacted by the se
tting of this command.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:ERRTYPE
TRIGger:A:BUS:B<x>:ARINC429A:CONDition
BUS:B<x>:ARINC429A:SOUrce
Arguments
STARt specifies a search based on the first bit of a word.
END specifiesasearchbasedonthe32ndbitofaword.
LABel specifies a search for a matching label.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-611
To Next Page
Loading...
Need help?
General
