Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
SDIDATASSM set
s the ARINC429 DATA field width to 23 bits wide (covering
bits 9 through 31 of the 32 bit packet)
Examples
BUS:B1:ARIN
C429A:DATA:FORMAT DATA
sets the ARINC429 DATA field to
19 bits wide.
BUS:B1:ARINC429A:DATA:FORMAT? might return SDIDATASSM, indica
ting
that the ARINC429 DATA field is 23 bits wide.
BUS:B<x>:ARINC429A:POLarity
This command sets the polarity of the ARINC429 bus (normal or inverted).
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Bus
Syntax
BUS:B<x>:ARINC429A:POLarity {NORMal|I
NVERTed}
BUS:B<x>:ARINC429A:POLarity?
Related Commands
TRIGger:A:BUS:B<x>:ARINC429A:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:CONDition
BUS:B<x>:ARINC429A:SOUrce
Arguments
NORMal - A positive differential pulse in the first half of a bit period that then
returns to zero differential represents a 1 on the differential source.
INVERTed - A positive differential pulse in the first half of a bit period that then
returns to zero differential represents a 0 on the differential source.
Examples
BUS:B1:ARINC429A:POLarity INVERTED sets the polarity so that a positive
differential pulse in the first half of a bit period that then returns to zero differential
represents a 0 on the differential source.
BUS:B1:ARINC429A:POLarity? might return NORMAL.
BUS:B<x>:ARINC429A:SOUrce
This command specifies the source for the differential input for the ARINC429
bus.
2-158 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English