Commands Listed in Alphabetical Order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:USB:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSE Qual
|MOREEQual|INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:QUALifier?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition
Arguments
LESSthan indicates the oscilloscope will search for a value that is less than a
set value.
MOREthan indicates the oscilloscope will search for a value that is greater than a
set value.
EQual indicates the oscilloscope will search for a value that is equal to a set value.
UNEQual indicates the oscilloscope will search for a value that is not equal to a
set value.
LESSEQual indicates the oscilloscope will search for a value that is less than
or equal to a set value.
MOREEQual indicates the oscilloscope will search for a value that is greater than
or equal to a set value.
INrange indicates the oscilloscope will search for a value that is within a range
set by two values.
OUTrange indicates the oscilloscope will search for a value that is outside of a
range set by two values.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:QU ALIFIER LESSTHAN sets the
oscilloscope to search when an address, data, or endpoint value is less thana
set value.
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:QU ALIFIER? might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:Q UALIFIER EQUAL indicating
that the search condition is to search when an address, data, or endpoint is equal
to a set value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SOFFRAMENUMber
This command specifies the value for the start of frame to be used in a USB search,
when the search condition is set to
TOKENPacket, and the token type is set to SOF
(Start of Frame). S EARCH<x> is the search number, which is always 1, and B<x>
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-709
To Next Page
Loading...
Need help?
General
