Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SOFFRAMENUMber
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SOFF
RAMENUMber?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition,
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:TOKENType
Arguments
<QString> within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF
hex).
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SO FFRAMENUMBER
“00000001000”
sets the start of frame number to 00000001000 (008 hex).
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SO FFRAMENUMBER? might
return
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SO FFRAMENUMBER
“00000001001”
, which indicates that the start of frame number is 00000001001
(009 hex).
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
This command specifies the packet ID (PID) for the special packet to be used in
a USB search: any, preamble or reserved.
SEARCH<x> is the search number,
whichisalways1,and
B<x>
Conditions
This command requires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPECIALType
{ANY|PREamble|RESERVed}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPECIALType?
2-710 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English