Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPLit:PORT:VALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPLit:PORT:VALue?
Related Com
mands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
Arguments
QString is a quoted string of up to 7 characters. The valid characters are 0 and 1.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:B1:USB:SP Lit:PORT:VALue “001010”
sets the split transaction hub address to search for to 001010.
SEARCH:SEARCH1:TRIGger:A:BUS:B1:USB:SP Lit:PORT:VALue? might
return XXXXXXX, indicating that the hub address value to search for doesn’t
matter.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:SC:VALue
When searching on a high-speed USB split transaction, this command specifies
whether to search for the start or complete phase of the split transaction, based
on the Start/Complete bit field value. (0 = Start, 1 = Complete). The default is
NOCARE.
SEARCH<x> is the search number, which is always 1, and B<x>
Conditions
This
command requires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPLit:SC:VALue
{NOCARE|SSPLIT|CSPLIT}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:US B:SPLit:SC:VALue?
Re
lated Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-713

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English