Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–163
!
! specifies that the template waveform is the waveform currently being
acquired using the specified channel.
! specifies that the template waveform is the waveform currently stored
as the specified math waveform.
! specifies that the template waveform is the waveform currently stored as
the specified reference waveform.
specifies that the template waveform for limit tests is the waveform currently
acquired using channel 2.
might return , specifying that the template waveform for limit tests is the
waveform currently stored as the MATH3 waveform.
LIMit:TEMPLate:TOLerance:HORizontal
Sets or queries the amount, in units of horizontal divisions, by which the source
waveform is varied horizontally when creating the destination waveform.
Limit Test
LIMit:COMPARE:CH<x>
"
"
"
Arguments
Examples
Group
Related Commands
Syntax
To Next Page
Loading...
Need help?
General
