Command Descriptions
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
2- 149
TDS210 and TDS220 models (firmware V2.00) and above with a TDS2CMA
communications module.
CH1+CH2
CH1–CH2
CH2–CH1
TDS224 model with a TDS2CMA communications module.
CH1+CH2
CH3+CH4
CH1–CH2
CH2–CH1
CH3–CH4
CH4–CH3
TDS1000B, TDS2000B , and TPS2000 Series.
CH1+CH2
CH3+CH4 (4-c hannel models)
CH1–CH2
CH2–CH1
CH3–CH4 (4-c hannel models)
CH4–CH3 (4-c hannel models)
CH1*CH2
CH3*CH4 (4-c hannel models)
FFT (CH<x>[, <window>])
For FFT, the optional <window> argument is HANning, FLATtop, or
RECTangular.
MATH:DEFINE “CH1+CH2”
Sets the math waveform so that it displays the sum of channel 1 and
channel 2.
MATH:DEFINE “FFT (CH1, HANNING)”
Sets the math waveform to display an FFT of c hannel 1 using a
Hanning window.
Examples
To Next Page
Loading...
