Getting Started
1-2
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
Refer to your oscilloscope user manual (Tektronix part numbers
listed on page v) for information on how to install, test, and
configure your oscilloscope and module.
NOTE. The firmware for the TDS1000B, TDS2000B, and TPS2000
series oscilloscopes includes communications, math, and storage
memory functions.
Table 1- 2:
Oscilloscope, extension module, and adapter compatibility
Series
TDS2CM,TDS2CMA
or TDS2CMAX
TDS2MM TDS2MEM
TEK-USB-488
TDS200 Yes Yes No No
TDS1000 or
TDS2000
Yes No Yes* No
TDS1000B or
TDS2000B
No No No Yes
TPS2000{
No No No No
*
TDS1001 and TDS2004 models are not compatible with the TDS2MEM module.
{ RS-232 included in the oscilloscope firmware.
NOTE. If you use GPIB with the TDS1000B or TDS2000B series, you
can set a unique GPIB address for the oscilloscope through the
UTILITY " Opti ons " GPIB Setup option.