Tektronix TDS3000 Series Program Manual

Command Descriptions
2- 106
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
DISplay:INTENSITy:BACKLight
Sets or returns the backlight intensity for the display. This is equivalent to setting
Backlight Intensity in the DISPLAY menu.
Display
DISplay:INTENSITy:BACKLight { HIGH | MEDium | LOW }
DISplay:INTENSITy:BACKLight?
DISPLAY:INTENSITY:BACKLIGHT?
might return :DISPLAY:INTENSITY:BACKLIGHT HIGH
DISplay:INTENSITy:WAVEform
Sets the intensity of the waveforms. This command is equivalent to adjusting the
WAVEFORM INTENSITY knob.
Display
DISplay:INTENSITy:WAVEform <NR1>
DISplay:INTENSITy:WAVEform?
<NR1> is the waveform intensity and ranges from 1 to 100 percent.
DISPLAY:INTENSITY:WAVEFORM?
might return :DISPLAY:INTENSITY:WAVEFORM 60 as the intensity of the
waveforms.
DISplay:PERSistence
Sets the length of time that data points are displayed. This command is equiva-
lent to changing Persist Time in the Waveform Display menu.
Display
Group
Syntax
Examples
Group
Syntax
Arguments
Examples
Group

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English