Tektronix TDS3000 Series - Page 185

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 147
HORizontal:RECORDLength
Sets the number of data points that are acquired for each record.
Horizontal
HORizontal:RECORDLength <NR1>
HORizontal:RECORDLength?
<NR1> is the record length in points. Valid values are 500 and 10000.
HORIZONTAL:RECORDLENGTH 500
specifies that 500 data points will be acquired for each record.
HORIZONTAL:RECORDLENGTH?
might return 10000 as the number of data points per record.
HORizontal:RESOlution
HORizontal:RESOlution
Sets the acquisition resolution (record length) to Low or High. This command
performs the same function as HORizontal:RECORDLength.
Horizontal
HORizontal:RESOLution { LOW | HIGH }
HORizontal:RESOLution?
<LOW> sets the horizontal resolution to 500 points.
<HIGH> sets the horizontal resolution to 10,000 points.
HORIZONTAL:RECORDLENGTH?
might return :HORIZONTAL:RESOLUTION HIGH.
HORizontal:RECORDLength
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments
Examples
Related Commands