Tektronix TDS3000 Series - Page 188

Command Descriptions
2- 150
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
ITU601:AUTOSet (Set Only)
(TDS3000B and TDS3000C Series with TDS3SDI Only)
Executes the TDS3SDI autoset function to automatically acquire and display the
601 digital video signal in the specified format.
TDS3SDI
ITU601:AUTOSet { ALLFields | ALLLines | RGB | YC | YPBPR }
ALLFields sets the oscilloscope to display the 601 digital video signal as a
composite signal on channel 1, triggered on all fields.
ALLLines sets the oscilloscope to display the 601 digital video signal as a
composite signal on channel 1, triggered on all lines.
RGB sets the oscilloscope to display the 601 digital video signal RGB video
information on channels 2, 3, and 4.
YC sets the oscilloscope to display the 601 digital video signal YC video
information on channels 3 and 4.
YPBPR sets the oscilloscope to display the 601 digital video signal YPbPr video
information on channels 2, 3, and 4.
ITU601:AUTOSET RGB
sets the oscilloscope to display the TDS3SDI 601 digital video signal R, G, and
B components.
ITU601:EDH (Set Only)
(TDS3000B and TDS3000C Series with TDS3SDI Only)
Sets the TDS3SDI EDH error counter to zero.
TDS3SDI
ITU601:EDH RESEt
ITU601:EDH RESET
resets the TDS3SDI EDH error counter to zero.
Group
Syntax
Arguments
Examples
Group
Syntax
Examples