Tektronix TDS3000 Series - Page 187

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 149
ID? (Query Only)
Returns information about the oscilloscope, including the model number,
options, application modules, and firmware version.
Status and Error
ID?
The instrument id in the following format:
TEK/<model number>,CF:91.1CT,FV:<firmware version number>
<option/module>:<version number>
ID?
might return ID TEK/TDS 3054,CF:91.1CT,FV:v1.00 TDS3GM:v1.00
TDS3FFT:v1.00 TDS3TRG:v1.00 TDS3VID:v1.00
*IDN? (Query Only)
Returns the same oscilloscope information as the ID? command except the data
is formatted according to Tektronix Codes & Formats.
Status and Error
*IDN?
The instrument id in the following format:
TEKTRONIX,<model number>,0,CF:91.1CT FV:<firmware version number>
<option/module>:<version number>
*IDN?
might return the response
TEKTRONIX,TDS 3054,0,CF:91.1CT FV:v1.00 TDS3GM:v1.00
TDS3FFT:v1.00 TDS3TRG:v1.00 TDS3VID:v1.00
ID?
Group
Syntax
Returns
Examples
Group
Syntax
Returns
Examples
Related Commands