Tektronix TDS3000 Series - Page 207

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 169
MASK:COUNt:MASK<m>:HITS? (Query Only)
(Requires TDS3TMT)
Returns the number of hits for all channels in the specified mask segment.
Mask
MASK:COUNt:MASK<m>:HITS?
<m> is the mask segment number, with a valid range of 1-8.
MASK:COUNT:MASK1:HITS?
might return 124.
MASK:COUNt:CH<x>:HITS?, MASK:COUNt:FAILURES?, MASK:COUNt:HITS?
MASK:COUNt:MASK<m>:CH<x>:HITS?
MASK:COUNt:STATE
(Requires TDS3TMT)
Sets or returns the mask hits count state. MASK:DISplay must be ON to enable
MASK:COUNt:STATE to count mask violations.
Mask
MASK:COUNt:STATE { OFF | ON | <NR1> }
MASK:COUNt:STATE?
ON turns on mask hit counting.
OFF turns off mask hit counting.
<NR1> is an integer number where NR1 = 0 turns off mask hit counting, and
NR1 ≠ 0 turns on mask hit counting.
MASK:COUNT:STATE ON
turns on mask hit counting.
Group
Syntax
Arguments
Examples
Related Commands
Group
Syntax
Arguments
Examples