Command Descriptions
2- 170
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
MASK:COUNt:TESTS? (Query Only)
(Requires TDS3TMT)
Returns the number of pass/fail tests that have occurred when MASK:TESt:RE-
Peat is turned on.
Mask
MASK:COUNt:TESTS?
MASK:COUNT:TESTS?
might return 50.
MASK:COUNt:FAILURES?
MASK:COUNt:TOTal? (Query Only)
(Requires TDS3TMT)
Returns the sum of all hits in all mask segments.This command is the same as
MASK:COUNt:HITS? and is kept for compatibility with other Tektronix oscillo-
scopes.
Mask
MASK:COUNt:TOTal?
MASK:COUNT:TOTAL?
might return 560.
MASK:COUNt:HITS?
Group
Syntax
Examples
Related Commands
Group
Syntax
Examples
Related Commands
To Next Page
Loading...
