Tektronix TDS3000 Series Program Manual

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 207
MEASUrement:GATing
Sets or returns measurement gating.
Measurement
MEASUrement:GATing { SCREen | CURSor | OFF }
MEASUrement:GATing?
OFF turns off measurement gating.
SCREen limits measurements to the portion of the waveform displayed on the
screen.
CURSor limits measurements to the portion of the waveform between the vertical
bar cursors, even if they are off screen.
MEASUREMENT:GATING SCREEN
limits measurements to the portion of the waveform displayed on the screen.
MEASUREMENT:GATING?
might return MEASUREMENT:GATING CURSOR
showing measurements are limited to the portion of the waveform between the
vertical bar cursors.
MEASUrement:IMMed? (Query Only)
Returns all immediate measurement setup parameters.
Measurement
MEASUrement:IMMed?
MEASUREMENT:IMMED?
might return :MEASUREMENT:IMMED:TYPE PERIOD;UNITS ”s”;SOURCE1
CH1;SOURCE2 CH2;DELAY:DIRECTION FORWARDS;EDGE1 RISE;EDGE2 RISE
Group
Syntax
Arguments
Examples
Group
Syntax
Examples

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English