Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 215
MEASUrement:INDICators:NUMVERT? (Query Only)
Returns the number of vertical measurement indicators currently being dis-
played.
Measurement
MEASUrement:INDICators:NUMVERT?
MEASUREMENT:INDICATORS:NUMVERT? might return
:MEASUREMENT:INDICATORS:NUMVERT 2 indicating that there are currently 2
vertical lines drawn on the graticule showing where the measurement specified
by MEASUrement:INDICators:STATE is being performed.
MEASUrement:INDICators:STATE
Set or returns the state of visible measurement indicators. Performs the same
operations as the front panel Measurement Indicators menu.
Measurement
MEASUrement:INDICators:STATE { OFF | MEAS<x>}
MEASUrement:INDICators:STATE?
OFF turns off visible measurement indicators.
MEAS<x> turns on the display of visible measurement indicators for measurement
<x>,where<x> can be 1, 2, 3, or 4. There must be an active measurement before
you can activate an indicator for a specified measurement.
MEASUREMENT:INDICATORS:STATE MEAS2
turns on the display of visible measurement indicators for measurement 2.
MEASUREMENT:INDICATORS:STATE?
might return MEASUREMENT:INDICATORS:STATE OFF indicating that no
measurement indicators are active.
Group
Syntax
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
Need help?
General
