Tektronix TDS3000 Series - Page 252

Command Descriptions
2- 214
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
MEASUrement:INDICators? (Query Only)
Returns all measurement indicator parameters.
Measurement
MEASUrement:INDICators?
MEASUREMENT:INDICATORS? might return
:MEASUREMENT:INDICATORS:STATE MEAS1;NUMHORZ 0;NUMVERT 4;HORZ1
7.5E0;HORZ2 -3.400000095367E0;HORZ3 0.0E0;HORZ4 0.0E0;VERT1
-6.351123E-6;VERT2 -3.179753E-6;VERT3 -6.40943E-6;VERT4 -6.403E-6
MEASUrement:INDICators:HORZ<x>? (Query Only)
Returns the position of the specified horizontal measurement indicator <x>,
where <x> can be 1, 2, 3, or 4.
Measurement
MEASUrement:INDICators:HORZ<x>?
MEASUREMENT:INDICATORS:HORZ1? might return
:MEASUREMENT:INDICATORS:HORZ1 -2.0E-3 indicating that horizontal
indicator1 has a value of -2mV.
MEASUrement:INDICators:NUMHORZ? (Query Only)
Returns the number of horizontal measurement indicators currently being
displayed.
Measurement
MEASUrement:INDICators:NUMHORZ?
MEASUREMENT:INDICATORS:NUMHORZ? might return
:MEASUREMENT:INDICATORS:NUMHORZ 2 indicating that there are currently 2
horizontal lines drawn on the graticule showing where the measurement
specified by MEASUrement:INDICators:STATE is being performed.
Group
Syntax
Examples
Group
Syntax
Examples
Group
Syntax
Examples