Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 227
MEASUREMENT:METHOD HISTOGRAM
specifies that the high and low reference levels are set statistically.
MEASUREMENT:METHOD?
returns :MEASUREMENT:METHOD MINMAX when the reference levels are set to MIN
and MAX.
MEASUrement:REFLevel? (Query Only)
Returns the reference level method and the reference levels in absolute and
percent terms.
Measurement
MEASUrement:REFLevel?
MEASUREMENT:REFLEVEL?
might return :MEASUREMENT:REFLEVEL:METHOD PERCENT;ABSOLUTE:HIGH
5.0E0;LOW 0.0E0;MID 2.5EO;MID2 0.0E0;MEASUREMENT:REFLEVEL:PER-
CENT:HIGH 9.0E1;LOW 1.0E1;MID 5.0E1;MID2 5.0E1.
MEASUrement:REFLevel:ABSolute:HIGH
Sets or returns the high reference level, and is the 100% reference level when
MEASUrement:REFLevel:METHod is set to ABSolute. This command is
equivalent to setting the Reference Levels in the MEASURE menu.
Measurement
MEASUrement:REFLevel:ABSolute:HIGH <NR3>
MEASUrement:REFLevel:ABSolute:HIGH?
<NR3> is the high reference level, in volts. The default is 0.0 V.
MEASUREMENT:REFLEVEL:ABSOLUTE:HIGH 1.71
sets the high reference level to 1.71 Volts.
Examples
Group
Syntax
Examples
Group
Syntax
Arguments
Examples
To Next Page
Loading...
