Tektronix TDS3000 Series - Page 313

Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 275
<NR3> is a floating point value with exponent that sets the threshold voltage
value for the specified logic trigger input.
ECL sets the threshold voltage value of the specified input to --1.3 V.
TTL sets the threshold voltage value of the specified input to 1.4 V.
TRIGGER:A:LOGIC:INPUT2:THRESHOLD -1.5E0
sets the threshold voltage of input 2 to --1.5 V.
TRIGger:A:LOGIc:PATtern:DELTATime
Sets or returns the pattern trigger time value. The time value is used as part of
the pattern trigger condition to determine if the duration of a logic pattern meets
the specified time constraints.
Trigger
TRIGger:A:LOGIc:PATtern:DELTATime <NR3>
TRIGger:A:LOGIc:PATtern:DELTATime?
<NR3> is a floating point value with exponent that sets the pattern trigger time
value. This argument has a range of 39.6E--9 (39.6 ns) to 10.0E0 (10 s), in
increments of 13.2 ns. Values that are not an increment of 13.2 ns are rounded to
the nearest correct value.
TRIGGER:A:LOGIC:PATTERN:DELTATime 71.28E-8
sets the pattern trigger delta time value to 712.8 ns.
TRIGger:A:LOGIc:PATtern:FUNCtion
Sets or returns the logic function to apply to the pattern trigger inputs.
Trigger
Examples
Group
Syntax
Arguments
Examples
Group