Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 297
TRIGger:A:VIDeo:SYStem
This command is the same as TRIGger:A:VIDeo:STANdard, and is for
compatibility with other Tektronix instruments.
TRIGger:B
Sets or returns the current B trigger parameters.
Trigger
TRIGger:B SETLevel
TRIGger:B?
SETLevel sets the B trigger voltage level to 50% of the source peak-to-peak
signal.
TRIGGER:B?
might return :TRIGGER:B:STATE 0;BY TIME;EVENTS:COUNT 1;:
TRIGGER:B:TIME 1.32E-8;LEVEL 1.0E-3;EDGE:SOURCE CH2;
COUPLING DC;SLOPE RISE
TRIGger:B:BY
Sets the B trigger to delay by time or events.
Trigger
TRIGger:B:BY { TIMe | EVENTS }
TRIGger:B:BY?
TRIGGER:B:BY EVENTS
sets the B trigger to delay by events.
Group
Syntax
Arguments
Examples
Group
Syntax
Examples
To Next Page
Loading...
