Tektronix TDS3000 Series Program Manual

Command Descriptions
2- 298
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
TRIGger:B:EDGe? (Query Only)
Returns the trigger coupling, source, and slope for the B edge trigger.
Trigger
TRIGger:B:EDGe?
TRIGGER:B:EDGE?
might return SOURCE CH1;COUPLING DC;SLOPE RISE
TRIGger:B:EDGe:COUPling
Sets or queries the type of coupling for the B edge trigger. This is equivalent to
setting Coupling in the Trigger menu.
Trigger
TRIGger:B:EDGe:COUPling { DC | HFRej | LFRej | NOISErej | AC }
TRIGger:B:EDGe:COUPling?
DC selects DC trigger coupling.
AC selects LFRej trigger coupling. AC coupling is for backward compatibility
and will not be returned by a query.
HFRej coupling removes the high frequency components of the DC signal.
LFRej coupling removes the low frequency components of the AC signal.
NOISErej selects DC low sensitivity. It requires added signal amplitude for more
stable, less false triggering.
TRIGGER:B:EDGE:COUPLING DC
sets the B edge trigger coupling to DC.
Group
Syntax
Examples
Group
Syntax
Arguments
Examples

Tektronix TDS3000 Series Specifications

General

Brand	Tektronix
Model	TDS3000 Series
Category	Test Equipment
Language	English