Command Descriptions
2- 328
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
WFMPre:<wfm>:NR_Pt?
returns the number of waveform points in the next CURVE query.
DATa:ENCdg, WFMPre:BYT_Or, WFMPre:BN_Fmt
WFMPre:<wfm>:PT_Fmt
Same as WFMPre:PT_Fmt, with the exception that <wfm> specifies the
source/destination waveform instead of DATA:SOURCE and DATA:DESTINA-
TION.
WFMPre:<wfm>:PT_Off
Same as WFMPre:PT_Off, with the exception that <wfm> specifies the
source/destination waveform instead of DATA:SOURCE and DATA:DESTINA-
TION.
WFMPre:<wfm>:WFId? (Query Only)
Same as WFMPre:WFId, with the exception that <wfm> specifies the source
waveform instead of DATA:SOURCE.
WFMPre:<wfm>:XINcr
Same as WFMPre:XINcr, with the exception that <wfm> specifies the source/
destination waveform instead of DATA:SOURCE and DATA:DESTINATION.
WFMPre:<wfm>:XUNit
Same as WFMPre:XUNit, with the exception that <wfm> specifies the source/
destination waveform instead of DATA:SOURCE and DATA:DESTINATION.
WFMPre:<wfm>:XZEro
Same as WFMPre:XZEro, with the exception that <wfm> specifies the
source/destination waveform instead of DATA:SOURCE and DATA:DESTINA-
TION.
Examples
Related Commands
To Next Page
Loading...
