Command Descriptions
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
2- 329
WFMPre:<wfm>:YMUlt
Same as WFMPre:YMUlt, with the exception that <wfm> specifies the
source/destination waveform instead of DATA:SOURCE and DATA:DESTINA-
TION.
WFMPre:<wfm>:YOFf
Same as WFMPre:YOFf, with the exception that <wfm> specifies the source/
destination waveform instead of DATA:SOURCE and DATA:DESTINATION.
WFMPre:<wfm>:YUNit
Same as WFMPre:YUNit, with the exception that <wfm> specifies the source/
destination waveform instead of DATA:SOURCE and DATA:DESTINATION.
WFMPre:<wfm>:YZEro
Same as WFMPre:YZEro, with the exception that <wfm> specifies the
source/destination waveform instead of DATA:SOURCE and DATA:DESTINA-
TION.
ZOOm:HORizontal:POSition
Sets or queries the horizontal position when in zoom.
Horizontal
ZOOm:HORizontal:POSition <NR3>
ZOOm:HORizontal:POSition?
<NR3> is the horizontal position in percent of record. Position range is from 0%
to 100%.
ZOOM:HORIZONTAL:POSITION?
might return :ZOOM:HORIZONTAL:POSITION 5.0E-1
Group
Syntax
Arguments
Examples
To Next Page
Loading...
