Save/Recall
3–42
TDS3000 Series User Manual
Saving a Waveform. To save a waveform to nonvolatile memory, first
select the waveform you want to save. Push the Save Wfm screen
button and then select one of the four reference waveform locations.
See page 3–76 for an alternate method you can use to save
waveforms.
Saved waveforms contain only the most current acquisition;
gray-scale information, if any, is not saved.
Displaying a Reference Waveform. To display a waveform stored in
nonvolatile memory, push the REF button and then push the Ref1,
Ref2, Ref3, or Ref4 screen button.
When a reference waveform is selected, it appears brighter than
other reference waveforms. Reference waveforms do not contain
gray-scale information.
To Next Page
Loading...
Need help?
General
