Accessories
ANEM4
(WIND sensor)
TVSTRD00PSI24 - LED 1-colour
Independent or simultaneous control of 3 outputs.
24V power supply from the PLA control unit (60W per output).
TVRGB00PSI24 - LED RGB (red, green, blue)
24V power supply from the PLA control unit (60W per output).
TVRGBW00PSI24 - LED RGB+W (red, green, blue + white)
Independent control of RGB and WHITE outputs, by means of
separate memorization of transmitter channels.
24V power supply from the PLA control unit (60W per output).
LED CARD to control the 1-colour, RGB or RGBW 24V LED lights.
(optional only in TVPLA868CC2(S) version)
RAIN102
(RAIN sensor)
TMP150
(TEMPERATURE sensor)
ATTENTION! Maximum power of the system (motors and lights) is 240W.
TELECO AUTOMATION S.R.L.
ITALY
Tel. +39.0438.388511
info@telecoautomation.com
TELECO AUTOMATION FRANCE
FRANCE
Tel. +33.(0)472.145080
info@telecofrance.com
TELECO AUTOMATION GMBH
GERMANY
Tel. +49.(0)8122.9563024
info.de@telecoautomation.com
TELECO AUTOMATION OCEANIA PTY LTD
AUSTRALIA
Tel. +61.(07)5502.7801
info@telecoautomation.com.au
This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights
To Previous Page
Loading...
