EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 59
Quick Review
Setup and check system Step 1 - Setup
Check that target depth is
set
Step 2 – Set Target Depth
Review/Set Parameters
and verify hold positions
have been entered as
needed
Step 3 – Set Parameters
Check that rapidCAST
moves through
deployment steps
Step 4 – Move to Point
Launch
Step 5 – Tension Controlled
Payout
Step 6 – Move to Point
Recovery
Check that Data
Downloaded
Target Depth met
Step 7 – Move to Point
Comm
To Next Page
Loading...