Echotrac E20 Operator's Manual8
Uncontrolled Technology Subject to Restrictions Contained on the Cover Page.
0 PREFACE
This Operator's Manual provides detailed procedures for the correct installation, operation, and
maintenance of the Echotrac E20 Singlebeam Echosounder system.
Before the system is operated for the first time, it is recommended that users familiarize themselves
with the contents of this manual to ensure optimal system performance.
If you require additional information or need clarification of any part of this document, please contact
Customer Support for assistance at reson-support@teledyne.com.
0.1 Document Conventions
Indicates a hyperlinked cross-reference. Click the word to be taken to the specified
reference point.
Indicates stepwise instructions to be followed in a particular order.
Indicates items of a list without any particular order.
0.2 Warnings, Cautions, and Notes
Throughout the manual the following definitions apply and in the format shown.
Warnings alert the user to potential harm to personnel. Ignoring warnings may lead
to injury, health hazards, or death.
Cautions alert the user to improper use of the system. Ignoring cautions may lead to
accidental damage to the equipment or loss of data.
Notes provide additional system or operating information not related to the safety of
personnel or equipment.
If you require additional information or need clarification of any part of this document, please contact
the customer support hotline at +45 20 999 088 (Europe) or +1 805 233 3900 (US).
0.3 Glossary
One pulse per second (the same as PPS)
Built-In Test Environment
serial port interface (communication port)
Differential Global Positioning Systems
Global Positioning System
To Next Page
Loading...
