Teledyne Echotrac E20 - Inventory; Table 1: Standard Scope of Delivery; Table 2: Optional Components

PREFACE
Echotrac E20 Operator's Manual8
p. 9 of 60
November 25, 2020
Version 8
Uncontrolled Technology Subject to Restrictions Contained on the Cover Page.
0.4 Inventory
Table 1: Standard scope of delivery
Description
Quantity
Echotrac E20, single channel or
Echotrac E20, dual channel or
Echotrac E20-ER extended range, dual channel
1
Part number
Description
Quantity
1013730-DK
Shipping case with handles, E20 and accessories, 585x361x238mm, 6kg
1
SB9999/00057
Cable, power, 230 volt, EU standard, 2.5m
1
88100610
Cable, power, 230 volt, UK standard, 2.5m, black, w. ground
1
60000002
Cable, power, 3-Cond NEMA5-15P TO IEC Feller 2.0m
1
1013300-DK
Cable assembly, AC/DC (mains / 24V) power supply with 7/8 connector
with 3 pins
1
1012776-DK
Cable assembly, DC power supply, singlebeam, 7/8 male to crimpring,
5m
1
1012734-DK
Cable assembly, Ethernet RJ45 metal plug screw with protection cap, to
standard RJ45, 5m
1
1014481-DK
Cable assembly, M12-A, 4-pin male to DSub 9-pin female, 2m
Cable Assy, M12A 4 P male to DSub 9 P Female X=2m
2
1012635-DK
Bag, zipper, neoprene, light blue 250x200x8mm, TELEDYNE MARINE
logo and www
1
1012317-DK
Connectors for Serial and Sync (M12-A, 4-pin) with protection cap
CONN,CIRC,SCREW,M12,4p,250V,4A,STRAIGHT M, for cable mount,
CL3 (reference M12-A connector 4 pole male, e.g. GT271154-31040)
2
1012775-DK
Dust caps for serial connector
CONN,CIRC,M12,M,DustCap,Cap Plastic for M12 male end, with lanyard
2
1012320-DK
Connectors for Transducers 7/8” with 5 pins with dust caps
CONN,CIRC,SCREW,7/8,5p,600V,8A,STRAIGHT M, for cable mount
(7/8“ connector 5 pole male, e.g. GT272254-32050)
2
1012767-DK
Cable Assy,DustCap Plastic for 7/8 male end with cord, 120mm
2
1013728-DK
Memory stick, USB - for manuals and SW, Echotrac E20
1
1013740-DK
Quick Reference Guide, Echotrac E20
1
1013832-DK
Quick Start Guide, SBES User Interface
1
Table 2: Optional components
Part number
Description
1013713-DK
Cable Assy, Converter transducer cable, 7/8 5 pole male to mill spec 5 pole
female(PT01J-14-5S), 40cm
Enables connection of transducers with military connector (CV100/200/300/MKIII
standard) to the Echotrac E20 (7/8" 5 pole).
1013700-DK
Cable Assy, Extender transducer cable, 7/8 5 pole male to 7/8 5 pole female, 25m
Please contact Teledyne Marine for consultancy on our available transducers, DGPS
position and motion sensors, sound velocity profilers, or specialized hydrographic software
solutions.
For a list of typically used items, see Appendix D – System Options.