Telegesis ETRX357-LR - Page 108

R309 AT Commands
©2015 Telegesis (UK) Ltd - 108 - AT Command Manual (Rev 3.09)
S47 – Power Descriptor
Description
Register defining the Node’s power descriptor,
which can be read by remote nodes using
ZigBee compliant ZDO messaging.
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Storage
Non-Volatile
Parameters
XXXX
The Power Descriptor as described in section
2.3.2.4 of the ZigBee specification.
Factory Default
C110
SW release
R302 ●
S48 – Endpoint 2 Profile ID
Description
Register defining the Profile ID of the Node’s
endpoint 2.
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Storage
Non-Volatile
Parameters
XXXX
The 16 bit Profile ID.
Factory Default
C091
SW release
R302 ●
S49 – Endpoint 2 Device ID
Description
Register defining the Device ID of the Node’s
endpoint 2
Operations
R/W LOCAL
R/W REMOTE
Becomes effective
Instantly
Storage
Non-Volatile
Parameters
XXXX
The 16 bit device ID.
Factory Default
0000
SW release
R302 ●