SUPPLEMENTS - СА62 Alarm Control Panel 73
Examples for voice messages
MESSAGE BY ZONE (at ADDRESS 6035 is set 0)
Messag. Event Example message
1 Alarm or tamper from Zone 1. “Alarm from Zone 1” or “Alarm in Entrance zone”
2 Alarm or tamper from Zone 2. “Alarm from Zone 2” or “Alarm in the corridor”
3 Alarm or tamper from Zone 3. “Alarm from Zone 3” or “Alarm in the children room”
4 Alarm or tamper from Zone 4. “Alarm from Zone 4” or “Alarm in the dinning room”
5 Alarm or tamper from Zone 5. “Alarm from Zone 5” or “Alarm in the bedroom”
6 Alarm or tamper from Zone 6. “Alarm from Zone 6” or “Cable interrupting in the alarm system”
7 Disarming with Ambush code “Ambush code have been entered”
8 Personal message. “Message for Mr. John Smith”
MESSAGE BY EVENT (at ADDRESS 6035 is set 1)
Messag. Event Example message
1 Alarm in the system “Burglary alarm”
2 Panic alarm in the system “Panic or Ambush code have been entered”
3 Tamper alarm in the system “Cable interrupting in the alarm system”
4 Fire alarm in the system “Fire”
5 Medical alarm in the system “Medical alarm”
6 AC loss “AC power supply interrupting”
7 Battery low “Battery too low”
8 Common message “Message for Mr. John Smith”
To Next Page
Loading...
