Installation and User Manual
Televic Conference Systems
6. Table Top Delegate
units
6.1. Introduction
The contribution units consist out of delegate and
chairman units. Both are used for speech
reinforcement in a conference room. The chairman
units are used to guide and control an ongoing
discussion.
6.2. Controls and
indicators
The D-Cerno delegate units have the following
features:
1. Microphone touch sensor button:
Activation/deactivation of the microphone.
Indication LEDs show the status of the
microphone. (red : active, green : request)
2. Loudspeaker:
Distributes the floor channel. Mutes in case
microphone is active.
3. Headphone connector:
Connection of headphone to the unit. Mono-
and stereo headphones can be used.
4. Volume touch sensor buttons:
Change the volume level of the headphones.
Remark: volume change is only possible when a
headphone is connected
5. Microphone
6. Led bar
Indicates the status of the unit.
Red: unit is active
Green: unit is in request mode
Pressing the Next-in-line or PRIOR button on a
chairman unit is indicated by illuminating the
corresponding part of the led bar.
7. NEXT button: (chairman unit only)
Grants the floor to the next delegate in the
waiting list.
8. PRIOR button: (chairman unit only)
Permanently deactivates the microphone of all
active units.
To Next Page
Loading...
