Installation and User Manual
Televic Conference Systems
Whenever the microphone limit is reached, and a
delegate presses the microphone icon, the longest
active microphone will be deactivated.
The chairman can cancel all the active microphones
by short pressing the PRIOR icon.
Holding the PRIOR button will temporarily mute all
active microphones. Releasing the button will return
the state of the microphone before the PRIOR button
was pressed.
Activation mode
In the override mode there is an additional setting to
define the way a delegate is granted the floor.
Toggle
Represented by animation sequence
The microphone icon needs to be pressed to activate
the unit and once more to deactivate the unit.
VOX
The microphone of the delegates will be activated
based on the fact that they start to talk. Once they
stop talking the microphone will automatically be
switched off when the release time has expired (see
chapter 0).
12.2.3. With request
Whenever the microphone limit is reached pressing
the MIC icon will add the delegate in a waiting list.
The unit will enter into request state.
A unit in request is visualized via the green light bar
on the delegate unit and by blinking the microphone
led ring.
The chairman can activate delegate unit that are in
request state by pressing the NEXT icon on his unit.
The light bar of first delegate unit in the queue list
will become red and the microphone will be
activated.
The chairman can cancel all the active microphones
by short pressing the PRIOR icon.
Holding the PRIOR button will temporarily mute all
active microphones. Releasing the PRIOR button will
return the status of the microphones as before the
PRIOR button was pressed.
12.3. Vox setting
12.3.1. Pencil drop
This setting allows the elimination of the activation
of microphones by short sounds for example when a
pencil is dropped on a desk.
The Pencil drop setting can be set on or off.
12.3.2. Sensitivity
To Next Page
Loading...
