Televic D-CERNO - 13.4. Configuration

D-Cerno Wired System
Installation and User Manual
Televic Conference Systems
V0.4 - December 6, 2012
49
With the webbrowser it is possible to see on which
USB device the recording is stored. On the left corner
you can see the time remaining for recording on the
USB device. This is automatically adjusted according
to the used recording format. The size of the
recording is displayed next to the recording.
Figure 13.16: Content of devices
- Playback:
Playing the file can be done by pressing on the
recorded file.
- Delete:
A recording can also be deleted by pressing on the
delete button.
Figure 13.17: Delete a recording
- Switch active USB device:
By using the switch button it is possible to switch
between the USB devices. This can be done before
recording or when a recorded is started.
Figure 13.18: Switch USB device
13.4. Configuration
The following settings can be accessed on both the
central unit and the webbrowser. That’s why we will
refer to paragraph Error! Reference source not
found. for the explanation of the different options.
- Volume:
Refer to chapter Error! Reference source not found.:
Loudspeaker volume
- Conference mode:
Refer to chapter Error! Reference source not found.:
Conference modes
- Vox settings:
Refer to chapter Error! Reference source not
found.Error! Reference source not found.: Vox
settings
- Microphone preset:
Refer to chapterError! Reference source not found.:
Microphone preset