Install nameplate in Plixus network 65
Use Nameplate and delegate unit on the same seat 66
Use Nameplate in standalone mode 66
Combine Plixus with Confidea G3 67
Combine wired and wireless units 67
Combine interpretation with wireless units 68
Range extension with multiple access points 69
Split and combine rooms 70
Create redundancy 70
Installation process
Introduction 73
Power supply 74
Power network extenders 74
Power uniCOS units and uniBOX 74
Power supply of the central unit 75
Install cables 77
Install microphones 78
General microphone characteristics 78
Technical microphone characteristics 78
Microphone connector characteristics 79
Microphone Operation Modes 79
Install delegate units 81
Connect Plixus units 81
Connect to Plixus engine 81
Install Confidea FLEX 82
Attach uniCOS T/MM10 to a fixed surface 84
Install the uniCOS units in the respective mounting bracket 86
Mount uniCOS F/MM 7 in the bracket 86
Remove uniCOS F/MM 7 from the bracket 88
Mount uniCOS F/MM 10 in the bracket 89
Remove uniCOS F/MM 10 from the bracket 91
Install Confidea G3 92
Connect Wireless Conference Access Point (WCAP) to Plixus network 92
Cabling of Nameplate 93
Connect to Plixus conference ports 93
Connect to USB 95
Mount the Nameplate 96
Portable usage 96
Fixed usage 97
DO CUMENT HISTO RY 6
To Next Page
Loading...
