Fixed Usage
To use the nameplate on a fixed position, first dettach the portable base from the mounting bracket. Tehn,
install the nameplate on the table by attaching the mounting bracket to the table. Click the nameplate onto
the mounting bracket.
Figure 1-55 How to mount the Plixus for fixed usage
Mount The Side Panels
Two different types of side panels are provided with the nameplate. Depending on the cabling of the
nameplate you should use panel A or B as depicted in the figure below..
To easily switch the position of the nameplate you can place the cables through the opening on either side
of the nameplate. In this case use the side panels A as depicted in the figure below. When fixating the side
panels beware that the left and right side panel are different
MO UNT THE NAMEPL ATE 97
To Next Page
Loading...
