Televic Plixus Series - Use Nameplate and Delegate Unit on the same Seat; Use Nameplate in Standalone Mode

Use Nameplate And Delegate Unit On The Same Seat
Associate a nameplate with a delegate unit on the same seat. The benefit of this setup is that the
nameplate is synced with your unit. This means that when a delegate microphone is active, the LEDof the
nameplate will also become active. In this case you can use the nameplate together with an RFID card.
When the delegate inserts his card into the unit, the nameplate can show the name of the delegate on that
seat.
Use Nameplate In Standalone Mode
If you just want to use the nameplate to display delegate information independently of the
conferencing system, you can use it in standalone mode. In this mode you can use the Nameplate
Manager alone to configure the layout of the nameplate and display the content on the nameplate devices
inside the room.
When you want to use the nameplate in standalone mode you will have to perform the following steps in
the Nameplate Manager (for every step you can find the link to the description of the procedure):
1. Initialize units using CoCon Core or the Plixus Core web server ("Initialize nameplates" on
page1).
2. Create a layout ("Add nameplate layout" on page1.
3. Create a meeting ("Create meeting" on page1).
4. Add delegates to the meeting ("Add delegates to meeting" on page1).
5. Assign delegates to seats ("Manage delegates and seats" on page1).
6. Prepare meeting and publish the nameplate content ("Publish Nameplate content" on page1).
INSTAL L NAMEPL ATE IN PLIX US NETWO RK 66