25
The AP, to which the router is connected to, dictates the type of
encryption.
The MAC address of the access points radio.
The quality between routers radio and some other device that is
connecting to the router. Will show 0% if no devices are trying to
connect or are currently maintaining a connection.
The physical maximum possible throughput that the routers radio
can handle. Keep in mind that this value is cumulative - The bit rate
will be shared between the router and other possible devices that
connect to the local AP.
6.3.1.4.2 Access Point
Display information about wireless connection (Access Point mode).
Wireless AP information
The channel which is used to broadcast the SSID and to establish new
connections to devices.
The SSID that is being broadcast. Other devices will see this and will be
able to use to connect to your wireless network.
Connection mode – Master indicates that you router is an access