Operation
Page 3-4
log you into the NET-PATH using the Remote Agent username and password.
The NET-PATH> prompt will display when the transparency session becomes
active.
5 Alternately, once you establish a dial-up connection, you can simply select a
desired host and press the Transparency button to go directly transparent with
that host.
Using the
Remote Agent
Manager to
Establish a
Network
Connection
1 In the IRISnGEN tree view, browse to the NET-PATH with which you wish to
communicate.
2 Select the NET-PATH by right-clicking the icon. From the pop-up menu, select
Remote Agent Manager.
3 When the RA Manager screen finishes loading, select the telephone icon from
the toolbar. This accesses a drop-down list that displays the methods you can use
to connect to the NET-PATH. You can connect via the modem or via the network.
For each connection option, the connection Information is shown. The modem
option displays the telephone number, and the network option displays the IP
address.
4 For a network connection, select the Network option. IRISnGEN will establish a
Telnet connection with the NET-PATH.
5 Once you establish the Telnet connection, you can press the Transparency button.
You are then logged in using your IRISnGEN user name and password. The
NET-PATH prompt appears.
To Next Page
Loading...
Need help?
General