Indicators and Diagnostics
Page 4-8
Universal Modems
When installing the NET-PATH remote agent, you may need to adjust the modem’s
country code setting for Multi-Tech modems with model number MT5656SMI.
1. Determine your modem type.
Do one of the following:
• Look at the model number on the bottom of your NET-PATH. If a “U” (Univer-
sal) appears in the sixth position, your NET-PATH has the Multi-Tech modem.
• Login to the NET-PATH command line and type the command “STATUS
MODEM.” A “modem enum” value of “0239” indicates your NET-PATH has the
Multi-Tech modem.
2. Change the country code.
Login to the NET-PATH command line and type “STATUS MODEM.” The modem
returns a status modem response, shown below. Use the “MODEMCOUNTRY”
command to modify the country code. Refer to Table 3-1 of the NET-PATH
Installation and Operation Guide.
Table 4-2: Country Code Definitions for Multi-Tech Modem Model MT5656SMI
NET-PATH
Country Code
Countries Status Modem Response
1 Japan 0
2 Argentina 07
3 Australia 09
6 Brazil 16
17 Malaysia 6C
20 New Zealand 7E
24 Hong Kong
India
Indonesia
99
25 Singapore 9C
26 South Africa 9F
31 Israel
Philippines
Canada
Chile
China
Mexico
United States
Korea-Republic Of
Thailand
B5
To Next Page
Loading...
Need help?
General