Document version: V1.0
75
6.9
IPTV
6.9.1
Overview
IPTV, Internet Protocol Television, is a technology that delivers television content to families over
IP networks.
IPTV is integrated with technologies from internet, multimedia and telecommunications. Through
the IPTV function, you can establish an IPTV data transparent transmission channel between a
router and an AP, solving the problem of difficult connection caused by the long distance between
the IPTV set-top box and the optical modem.
If the broadband service you subscribed includes the IPTV service, you can enable the IPTV
function on your router and AP, so that you can watch IPTV programs through the network set-top
box and TV while surfing the internet through the AP.
To access the page, choose Wireless > QVLAN Settings.
Here, you can set the QVLAN mode of AP to IPTV, so as to use the IPTV function together with a
router supporting IPTV.
Parameter description
It specifies the QVLAN mode of the AP.
⚫
QVLAN: Enable the 802.1Q VLAN function of the AP.
⚫
IPTV: It is used in IPTV business scenarios. This function needs to be used with the
IPTV function of a Tenda enterprise router of the same brand. It can establish an IPTV
data transparent transmission channel between the router and the AP, and solve the
problem of difficult connection caused by the long distance between the IPTV set-top
box and the optical modem. In this mode, you need to bind the AP to the network
port of the IPTV set-top box on the router.
To Next Page
Loading...
