Tenda W15-Pro - Wireless Status

Document version: V1.0
16
4.2 Wireless Status
To access the page, choose Status > Wireless Status.
This page displays general radio status and SSID status of the AP. By default, the page displays the
information of 2.4 GHz wireless status. To view the wireless status of 5 GHz, click 5 GHz.
Parameter description
Parameter
Description
RF Status
RF
It specifies whether the wireless function of the AP is enabled.
Network Mode
It specifies the current network mode of the AP.
Channel
It specifies the current working channel of the AP.
SSID Status
SSID
It specifies the names of all the wireless networks of the AP.
MAC Address
It specifies the physical addresses corresponding to the SSIDs of the AP.
Status
It specifies whether the wireless networks corresponding to the SSIDs of
the AP are enabled.
Security Mode
It specifies the security modes of the wireless networks corresponding to
the SSIDs of the AP.