Tenda W15-Pro - Page 22

Document version: V1.0
15
Parameter
Description
Firmware Version
It specifies the firmware version of the AP.
Hardware Version
It specifies the hardware version of the AP.
Number of Wireless Clients
It specifies the number of wireless clients currently
connected to the AP.
LAN Port Status
MAC Address
It specifies the physical address of the LAN port of the AP. If
you connect the AP to other devices using Ethernet cables,
the AP uses this MAC address to communicate with those
devices.
IP Address
It specifies the IP address of the AP and it is also the
management IP address of the AP.
The web UI of the AP is accessible by visiting this IP address.
You can change the IP address on the LAN Setup page.
Subnet Mask
It specifies the subnet mask of the IP address of the AP.
Primary DNS
It specifies the primary DNS server of the AP.
Secondary DNS
It specifies the secondary DNS server of the AP.