Document version: V1.0
94
8.4
System Log
The Logs page allows you to view system logs.
The logs of the AP record various events that occur and the operations that users perform after
the AP starts. In case of a system fault, you can refer to the logs during troubleshooting.
To access the page, choose Tools > System Log.
To ensure that the logs are recorded correctly, verify the system time of the AP. You can correct the
system time of the AP by choosing Tools > Date & Time > System Time.
When the AP reboots, the previous logs are lost.
The AP reboots when the AP is powered on after a power failure, the QVLAN function is configured,
the firmware is upgraded, an AP configuration is backed up or restored, or the factory settings are
restored.
To Next Page
Loading...
