Tenda W15-Pro - Traffic Control; Overview

Document version: V1.0
79
7 Traffic Control
7.1 Overview
The Traffic Control page allows you to set limits on the internet speed of clients to guarantee a
proper allocation of limited broadband resources.
By default, the Traffic Control function is disabled. If you want to use this function, configure it on
the Advanced > Traffic Control page.
Parameter description
Parameter
Description
Traffic Control
⚫
Disable: The Traffic Control function is disabled.
⚫
Manual: The Traffic Control function is enabled. The network administrator
manually sets SSID and the maximum upload/download rate of user
devices to limit the total bandwidth of SSID and evenly allocate bandwidth
to users. In this way, if multiple SSIDs are enabled, and a user network with
a lower priority (such as guest network) occupies an excessively high
internet speed or a user occupies too much bandwidth, such circumstances
as excessively low internet speed or even internet unavailability for other
users will not occur.
Radio Band
It specifies the radio band of the WiFi network on which you want to set a
traffic control rule.
SSID
It specifies the name of the WiFi network on which you want to set a traffic
control rule.