Document version: V1.0
8
3.1.2
Quick Setup
Before configuration, ensure that the upstream router has been connected to the internet.
Step 1
Choose Quick Setup.
Step 2
Choose the Radio Band you wish to configure, for example, 2.4GHz.
Step 3
Set Working Mode to AP.
Step 4
Set SSID (Primary SSID).
Step 5
Set Security Mode and configure the corresponding parameters.
Step 6
Click Save.
Step 7
If you need to configure the other radio band, repeat steps
2
to
6
.
---End
Search and connect your wireless devices such as smartphones to the SSID you set. Enter the
wireless password (the Key you set) and you will be able to access the internet.
To Next Page
Loading...
