Document version: V1.0
78
Step 2
Configure the router.
1.
Log in to the web UI of the router, enable the IPTV function of the router, and assign a
LAN port of the router as the IPTV port, LAN 2 in this example.
2.
In the router's AP list, locate the AP to be connected to the IPTV set-top box, and bind an
Ethernet port of the AP to IPTV service, LAN 1 in this example.
Step 3
Connect the IPTV cable of the optical modem to the port 1 of the switch.
Step 4
Use an Ethernet cable to connect the port 2 of the switch to the IPTV port (LAN 2 in this
example) of the router.
Step 5
Connect the Ethernet port (LAN 1 in this example) of the AP to the IPTV set-top box.
Step 6
Configure your IPTV set-top box using the IPTV account and password.
----End
Configure the internet service
Step 1
Connect the Ethernet cable from the optical modem to the WAN 1 port of the router.
Step 2
Use an Ethernet cable to connect the LAN port of router to the uplink port of AP3.
Step 3
Configure the Internet Settings of the router and the AP.
----End
Verification
After the configuration, you can watch IPTV programs on your TV while surfing the internet.
To Next Page
Loading...
