Portable Wireless AP/Router
² SSID SSID (Service Set Identifier) is the unique
name of the wireless network. Input the SSID of the
AP you want to connect.
² MAC Address: The Router’s physical MAC address as
seen on your local network is unchangeable. Input the
MAC address of the AP you want to connect.
Sometimes, MAC address is also named BSSID.
(BSSID Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address
of wireless access point.)
² Channel: Specify the effective channel (from 1 to
13\Auto) of the wireless network. The channel you
select must be correspondence with the AP.
² Security Mode: The security mode you set should be
To Next Page
Loading...
