Portable Wireless AP/Router
Mode” and AES for “WPA Algorithms.” Input 8 ~ 63
numbers, letters, and symbols for pass phrase. Click “Next”
to save the configuration. More details please refer to the
following chapter.
Click “Apply” to save the configurations and the router will
be rebooted automatically.
Note: Make sure the device have the same Channel,
Security mode and Extend channel as the access point.
5.3. WDS+AP Mode Setup Wizard
Log on the web-based interface as chapter 4 and then
configure the mode as below.
5.3.1. Select “WDS+AP”, click “Setup Wizard” and “Next”
button.
To Next Page
Loading...
Need help?
General
