Portable Wireless AP/Router
Policy Name: Enter a name for the access policy selected.
IP Start/End: Enter the starting/ending IP address.
Port: Enter the port range based over the protocol for access
policy.
Type: Select one protocol (TCP/UDP/Both) from the
drop-down menu.
Times: Select the time range of client filter.
Date: Select the day(s) to run the access policy.
If you don’t want the computer at the IP address of
192.168.2.100 to access the Internet from 900 to 18 00
everyday without restrictions to other computers in LAN,
you need to set the packet filtering list as the above diagram.
10.2 URL Filter Settings
In order to control the computer to access to websites, you
can use URL filtering to allow the computer to have access
to certain websites at fixed time and forbids it having
access to certain websites at fixed time.
To Next Page
Loading...
Need help?
General
